|
|
House in Vsetín
Dvořák, Roman ; Skřeková, Tereza (referee) ; Rusinová, Marie (advisor)
The subject of this bachelor thesis is design documentation of a detached house with business premises. The object is located in village of Vsetín, set in flat terrain. The building is divided to the detached house and to the business premises. The business premises is designed as a hairdresser´s for one hairdresser. The detached house is with partial basement, it has two above-ground floors and its roofed with warm flat roof. The roof over 1.NP will be used as a terrace. The structural system of a building is made from ceramic blocks Heluz Family 50 2in1, structures and ceillings are made of cast-in-place reinforced concrete. The part of documentation is fire safety assessment, thermal assessment, acoustic assessment and the daylighting assessment.
|
|
|
Detached House with Business Premises
Dvořák, Martin ; Pilný, Ondřej (referee) ; Smolka, Radim (advisor)
The subject of this bachelor thesis is design documentation of a detached house with business premises. The object is located in a village of Vysoký Újezd near Beroun, in the south part of the village, where they are planning a new development of detached houses. The building is divided into the detached house for four to six members of a family and on the business premises. The business premises is designed as dental surgery for one dentist and one nurse. The owner of the house is dentist at the same time. The detached house is with partial basement, it has two above-ground floors and its roofed with pitched roof made of concrete roof tiles. The business premises is roofed with flat roof. The first half of the flat roof will be used as a terrace and the second half will be done as a green roof. The business premises has one above-ground floor. The structural system of a building is made of clay blocks and the Porotherm MIAKO system is used for horizontall construction. The part of a desing documentation is fire safety assessment, thermal assessment, acoustic assessment and the daylighting assessment.
|
|
|
Detached house with cafe
Dostálová, Jana ; Pobucká, Slávka (referee) ; Utíkalová, Ivana (advisor)
The subject of this bachelor thesis is a desing documentation of a detached house with café. The object is located in village Babice nad Svitavou in expanding part of village intended for family housing. Building in divided into two different parts, one for family living and other for café. Object has a partial basement with two full above-ground floors. Part of ground floor in roofed with flat extensive green roof, first floor is roofed with warm flat roof. The structural system of a building is made of ceramic blocks Porotherm and reinforced concrete ceiling slabs. The part of a design documentation is a fire safety assessment, thermal assessment, acoustic assessment and the daylighting assessment.
|
|
|
Detached house Hluchová
Heczko, Martin ; Komínková, Kateřina (referee) ; Petříček, Tomáš (advisor)
The subject of this thesis is the process of building technical part of the project documentation for the realization of a new family house in Nydek, parcel number 1150/4. The building is located in the sparsely built-up area. The building is situated on a gentle sloping ground. The building is designed as a three-level. The main residential part consists of a two-storey object with a gable roof with a slope of 12%. Mezzanine is made up by garage and foyer. Mezzanine is roofed by a flat roof. Entry to the building is from the north-east side, relaxing terraces are conceived on the southwest side. The main living area is divided to social part as first overground floor and reclined part as first overground floor. House has got a partial basement. Connection with public communications will be provided by a paved surface. Ground plan dimensions of the building are 18.14 x 16.44 m. Vertical load-bearing masonry is made of molded bricks Porotherm 30 P+D and formwork molded bricks BT 30 suffused by concrete. Partition walls are made of molded bricks Porotherm 14 P+D and Porothem 11,5 P+D. The ceiling are made of the systém called Porothem. The building will be based on the foundation strips. Foundation ratios are simple.
|
|
|
Crematorium
Hančík, Dominik ; Kacálková, Lenka (referee) ; Kacálek, Petr (advisor)
The Master´s thesis deals with the development of project documentation for the crematorium in the Mařatice district near Uherské Hradiště. The new building is located in the eastern part of Mařatice and is designed in a locality that, by its nature, represents areas for the construction of public cemeteries and related services. The proposed new crematorium building will be a free-standing, partly two-storey and partly basement building. The object will fulfill the requirements for a sacred building. The building is based on foundation belts made of plain concrete locally supplemented with foundation footings in place of supporting reinforced concrete columns. The building is divided into three basic sections, which are divided according to their function into the section associated with performing the last farewell, the section used for cremation and the + section. The new building is designed as a partly two-storey and partly basement building with a dominant projecting part, which has the task of imagining a long path dividing two different worlds. Part of the partial basement is designed with regard to the possibility of creating separate parking spaces for crematorium employees. The first above-ground floor is barely a part of the entire new building, and all traffic is designed on this level. The partial second above-ground floor is situated in SECTION A – i.e. in the premises used for holding the last farewells. This floor is designed with the growing trend of accompanying these devotional acts with a live band. Structurally, the object is designed as a classic brick building on the 1st floor level - partially the sub-basement is structurally formed by fittings of lost formwork. The ceiling structure will be made in combination as a heavy monolithic reinforced concrete ceiling slab supplemented with prestressed Spiroll ceiling panels. The roof structure of the entire building is solved with the help of extensive flat roofs in several height levels. These structures are designed with a slope of 3%. The exterior facade of the proposed new building will be made of three different materials. The individual type of facade materials used depends on the individual sections of the new building. The first type of facade is solved by a type of ventilated structure covered with wooden cladding of the Rhombus species from larch wood. The second type of facade is again chosen as a ventilated structure with cladding made of large-format sheet metal templates with the character of folded sheet metal. The third type of facade is then covered with colored pasty silicate plaster in white.
|
|
|
Detached house with cafe
Dostálová, Jana ; Pobucká, Slávka (referee) ; Utíkalová, Ivana (advisor)
The subject of this bachelor thesis is a desing documentation of a detached house with café. The object is located in village Babice nad Svitavou in expanding part of village intended for family housing. Building in divided into two different parts, one for family living and other for café. Object has a partial basement with two full above-ground floors. Part of ground floor in roofed with flat extensive green roof, first floor is roofed with warm flat roof. The structural system of a building is made of ceramic blocks Porotherm and reinforced concrete ceiling slabs. The part of a design documentation is a fire safety assessment, thermal assessment, acoustic assessment and the daylighting assessment.
|
|
|
House in Vsetín
Dvořák, Roman ; Skřeková, Tereza (referee) ; Rusinová, Marie (advisor)
The subject of this bachelor thesis is design documentation of a detached house with business premises. The object is located in village of Vsetín, set in flat terrain. The building is divided to the detached house and to the business premises. The business premises is designed as a hairdresser´s for one hairdresser. The detached house is with partial basement, it has two above-ground floors and its roofed with warm flat roof. The roof over 1.NP will be used as a terrace. The structural system of a building is made from ceramic blocks Heluz Family 50 2in1, structures and ceillings are made of cast-in-place reinforced concrete. The part of documentation is fire safety assessment, thermal assessment, acoustic assessment and the daylighting assessment.
|
|
|
Detached House with Business Premises
Dvořák, Martin ; Pilný, Ondřej (referee) ; Smolka, Radim (advisor)
The subject of this bachelor thesis is design documentation of a detached house with business premises. The object is located in a village of Vysoký Újezd near Beroun, in the south part of the village, where they are planning a new development of detached houses. The building is divided into the detached house for four to six members of a family and on the business premises. The business premises is designed as dental surgery for one dentist and one nurse. The owner of the house is dentist at the same time. The detached house is with partial basement, it has two above-ground floors and its roofed with pitched roof made of concrete roof tiles. The business premises is roofed with flat roof. The first half of the flat roof will be used as a terrace and the second half will be done as a green roof. The business premises has one above-ground floor. The structural system of a building is made of clay blocks and the Porotherm MIAKO system is used for horizontall construction. The part of a desing documentation is fire safety assessment, thermal assessment, acoustic assessment and the daylighting assessment.
|
|
|
Detached house Hluchová
Heczko, Martin ; Komínková, Kateřina (referee) ; Petříček, Tomáš (advisor)
The subject of this thesis is the process of building technical part of the project documentation for the realization of a new family house in Nydek, parcel number 1150/4. The building is located in the sparsely built-up area. The building is situated on a gentle sloping ground. The building is designed as a three-level. The main residential part consists of a two-storey object with a gable roof with a slope of 12%. Mezzanine is made up by garage and foyer. Mezzanine is roofed by a flat roof. Entry to the building is from the north-east side, relaxing terraces are conceived on the southwest side. The main living area is divided to social part as first overground floor and reclined part as first overground floor. House has got a partial basement. Connection with public communications will be provided by a paved surface. Ground plan dimensions of the building are 18.14 x 16.44 m. Vertical load-bearing masonry is made of molded bricks Porotherm 30 P+D and formwork molded bricks BT 30 suffused by concrete. Partition walls are made of molded bricks Porotherm 14 P+D and Porothem 11,5 P+D. The ceiling are made of the systém called Porothem. The building will be based on the foundation strips. Foundation ratios are simple.
|
guest ::
